|
One of the most important points
of any new conservatory installation, (and one that is
most often over-looked) is to aim to achieve the lowest possible
'U' value so as to enable
the maximum all year round use - this includes the floor and walls
which are obvious
areas where effective contributions to this aim can be achieved
quite cost effectively.
Where possible and in most cases all walls should
be constructed to match the existing
brickwork, stone or rendered finish construction of the existing
property and have an
insulated cavity wall ! With a choice of brickwork on both sides,
or brickwork externally
and the use of internal insulated blockwork and plastered.
Compared to a single skin-wall which most window
companies build, this has a 'U' value
of 3.1 W/m²K, and a insulated cavity wall of 0.5W/m²K.
More than a 600% improvement
in insulation is effectively achieved by using this method !
The internal conservatory floor can be float finished
or screeded, and can be fully
insulated to further increase insulation values. A uninsulated has
a 'U' value of only
1.5 W/m²K, but if you add a 25mm insulation to this it drops
to 0.8 W/m²K, whilst a
50 mm insulation achieves a 0.55 W/m²K - that equates to nearly
a 300% improvement.
(Figures are approximate based on a conservatory floor of 3m Sq)
Jarvis Windodowcraft have a construction and engineering
experience, so you can rest
assured that regardless of the size, type or design of your chosen
conservatory, we will
treat each individual building, property and installation with the
utmost respect . . and
whilst every conservatory we build and install contains the same
principles - it is a fact
that the ground your property resides on will be slightly different
in one form or another
than one just round the corner.
With this fact in mind we always have open mind and
a fresh approach to every new
customer, order and conservatory which we are about to install !
Below is an example of a conservatory base under construction .
.
          
< <
Return to main Conservatory page
|